This Bacteriological Incubator are made as per guideline of GMP supplied with IQ OQ & PQ document with calibration report for PID controller.
Bacteriological Incubator
Description
This Bacteriological Incubator are made as per guideline of GMP supplied with IQ OQ & PQ document with calibration report for PID controller.
Technical Specifications:
- Triple walled construction
- Inner made of S.S.316 mirror polished
- Outer made of S.S.304 Dull finish
- Gap between the two walled filled with glass wool insulation of 65 mm
- Heating Element is made of S. S. ‘U’ type tubular nichrome wire with S.S. Sheathing
- Heaters are placed at the right & left side of the inner chamber
- PID Controller with auto tuning facility with double display to view set & current temp
- Temp. Range 5 C above ambient to 60 C with accuracy of ± 0.5 C.
- Silicon rubber gasket fitted on door to prevent lost of heat
- Control Switch & pilot lamp are fitted on front panel supplied with S.S. Rod Type Jali
Bacteriological Incubator GMP Model Is Available in Below Sizes:
| Inner Size Size in Inches (W X D X H) | No.of Shelves | Capacity In LTR | Rating Watts |
| 12″x12″x12″ | 1 | 27 | 250 |
| 14″x14″x14″ | 2 | 42 | 300 |
| 18″x18″x18″ | 3 | 90 | 400 |
| 18″x18″x24″ | 4 | 120 | 700 |
| 24″x24X”24″ | 4 | 215 | 1000 |
| 24″x24″x36″ | 5 | 320 | 1500 |
Optional Accessories:
- Digital Timer to cut off the heater at set interval
- PID Controller with Printer interface to record
- Set Valves & actual valves data & Time
- 80 Column DOT MATRIX Printers
- Safety controller with alarm for Temp. Overshoot
- Single 4 point/8 point data logger
